The robot coating line is an automated coating system that utilizes robots and related equipment to complete the coating process of products. The following is the general workflow of the robot coating line:
Product preparation: Send the products that need to be coated to the coating line and ensure that the surface of the products is clean, free from oil stains or other impurities. Before painting, some pre-treatment work may be required, such as grinding, deburring, etc.
Coating preparation: Prepare the required coatings and coating materials, including pigments, solvents, additives, etc. Ensure that the coating quality meets the requirements, and mix and mix according to the specified proportion.
Robot settings: Set the working parameters and paths of the robot based on the size, shape, and coating requirements of the product. This includes adjusting the speed of the robot, spraying pressure, spraying angle, etc.
a. Spray preparation: The robot moves the spray equipment (such as a spray gun) to the appropriate position and controls the flow rate and spray mode of the coating through the control system.
b. Spray operation: The robot moves the spray gun along the surface of the product according to the preset path and speed, and evenly sprays the coating. The accuracy and stability of the robot ensure the uniformity and consistency of the coating.
c. Painting correction: According to needs, robots can perform painting correction, such as adjusting the spraying angle, increasing or reducing the amount of paint sprayed, etc.
Drying/Curing: After coating is completed, the product may need to be dried and fixed through a drying or curing process. This can be done through oven, ultraviolet radiation, and other methods.
Quality inspection and packaging: After drying/curing, conduct quality inspection on the coating to ensure that the coating quality meets the requirements. Then package the product and prepare for shipment or enter the next production stage.